Simultaneously dries as it protects, avoiding dirt, grime, etc., that other "wet" lubricants actually attract
Sprays upside down
Lubricates: is free of silicone, making it an excellent lubricant. Stands up to extreme temperatures.
Penetrates: works quickly to free frozen nuts, bolts, and metal parts
Prevents Rust: provides a molecular shield that locks to the metal
Cleans: removes grease, tar, and grime from metal parts and painted surfaces
Stops squeaks
Displaces moisture: gets under moisture to lift it away from the surface to be protected
Nonconductive: prevents short circuits in high moisture environments, halts electrical leakage from wet ignition wires

Industrial Applications
Applications for industry are nearly endless. Protect working surfaces of machinery; use in dip tanks to protect production parts in process, or apply on tools when stored. M1 is also ideal in highly corrosive situations that destroy metal equipment used in marine environments.

Universal Applications
Use to dry wet automotive ignition systems. Great on ski bindings and prevents snow from sticking to shovels. Ideal on sticky drawer slides and window frames. Removes tar from car bumpers and painted surfaces. Can also be easily removed to prepare surfaces for painting. Use on tools, hinges, appliances, guns, knives, bicycles, mowers, fishing gear, locks, and on and on...

Bulk Containers
Larger size containers of M1 make economical sense. You can also use and refill the spray dispenser bottle, saving you money and preventing waste and disposal of empty cans.
Specifications

Color amber (clear)
Odor pleasant
Specific Gravity 788 @ 60° F (15.5° C)
Viscosity 2.2 cSt (centiStokes) converts to 10.5 SUS (seconds universal Saybolt) at 72° F (22.2° C)
Lubrication 1500 lbs. (680.4 kg) of pressure (independent testing)
Flash Point 152°F (67°C)
Percent Non-Volatile 15% by weight
Percent Volatile, Maximum 85% by weight petroleum distillate
Pour Point -100° F (-73° C) excellent low temperature stability
Evaporation Rate .7 (water = 1)
Coverage 3500 to 4000 sq. ft. (72-82 sq. meters) per U.S. Gal. (4.5 liters)
Boiling Point 370-470°F (187.8-243.3°C)
Weight, Applied Coating 1.7 x 10-3 lbs. per sq. ft.
Film Thickness .0004" (0.010 mm) average
Dielectric Strength 18,000 v with .100" (2.54 mm) gap
Humidity meets and exceeds ASTM-D655 zero rust after 1000 hours
Salt Spray meets and exceeds ASTM-B117 zero rust after 48 hours
Indoor protection lasts up to a year
Outdoor protection - reapply as needed
NSF registered No. 124332, Category Code H2 Acceptable as a lubricant, release agent or anti-rust film on equipment and machinery parts in and around food processing areas where there is no possibility of direct food contact.
NOTE: Most plastics, rubber and painted materials show no visible effects when coated with M1.