No. 220
Mul-T-Anvil Micrometers
This tool was a new development in micrometer design and patent is held
by Starrett. This micrometer will handle a wide variety of measurements
impossible to obtain with regular micrometers, such as measuring the wall
thickness of tubing, cylindrical walls from a hole or slot to an edge, many
hard-to-reach locations, and the thickness of screw heads, shoulder lengths,
etc. A most interesting feature of this tool
is that additional anvils of various shapes can be made up, and many of
these anvils do not have to be hardened for that "special job".
This micrometer can be furnished with .0001"
graduations, but we recommend .001" or 0.01 mm for easier and more
accurate readings. The Starrett Company, with our years of experience,
recommends this because the anvils on this type of tool are not backed
up by a frame as in a regular micrometer and could bend slightly. |
Click
here for bigger image. |
Ease-of-Handling Features
- Balanced frame and thimble design insure
easy handling, better readability
- Ring-type knurled lock nut for quick and
sure locking
- A choice of smooth friction thimble for
uniform pressure or the combination ratchet and speeder for uniform
pressure and quicker adjustment
- Interchangeable anvils are rigidly held
in the vise type frame and quickly interchanged by a single lock screw
adjustment
- Two hardened anvils furnished –
round anvil approximately .120" diameter (3 mm) and flat anvil
approximately .125" (3 mm) and .060" (1.5 mm) thick
- "V" Anvil for measuring thickness
of screw heads and shoulder lengths available separately
Accommodates special anvils up to 5/16" (8 mm) thick
- Can be used as a height gage by removing
the vise jaw
Readability Features
- Starrett satin chrome finish – no
glare – resists rust
- Advanced sleeve design with staggered
lines and distinct figures for precise and easy readability
- Quick-reading figures – every thousandth
numbered on Inch tools
Accuracy and Long-Life Features
- Rigid one-piece frame of drop forged steel
- Extremely hard and stable one-piece spindle
(the heart of our accuracy)
- Micro-lapped measuring faces
- Quick and easy adjustment
- Starrett workmanship
- Tool is accurate to ± .0002"
or ± 0.004 mm
--------------------------------------------------------------------------------
1" and 25 mm models sent in fitted case.
Deluxe case available by ordering No. 220ZZ-1.
2" and 50 mm models packed one in a box without case. Deluxe case
available by ordering No. 220ZZ-2.
|
