DK-26
Digital Keypad details:
The DK-26 Series Keypad is a digital keypad system designed for
medium/high security control of electric locks. It consists of two components:
the keypad and the CPU board. This allows the CPU board to be mounted
within the protected area for higher security. Tampering with-or even
destroying the keypad-will not release the door. The rugged stainless
steel keypad may be mounted outdoors in any environment as it is fully
weatherproof. CURRENT DRAW and VOLTAGE:
7 mA@ rest, 160 mA active, 12 VAC or VDC
20 mA@ rest, 190 mA active, 24 VAC or VDC
DIMENSIONS: Keypad: 1 1/2” x 7” x 1” [38mm x 178mm x 25mm]
CPU Enclosure: 8 1/16” x 6” x 3” [205mm x 152mm x 76mm]
OPERATING ENVIRONMENT & TEMPERATURE:
Indoor or outdoor use -22
F to +158 F [-30 C to +70 C]
Weather proof and vandal resistant
Mounts on a narrow mullion
True 10 digit operation (keys are not paired)
Wiegand output available
Remote circuit board is mounted in metal enclosure and provides for
multiple users-59 or expandable to 119
5 Amp DPDT relay output for lock control and alarm shunt, camera call-up or
other device interface or as a REX input
16 ft. [4.8m], 12 conductor, 22 gage cable
3 LEDs and a bell button
|
[ product brochure ]
[ installation manual
] |
