| Description |
Main
Lobby Control Panel |
Main
Relay Control Panel |
| Power Input |
| 12VAC/12VDC 40VA UL listed
Transformer (12VAC is included |
12VAC/12VDC 40VA UL listed
Transformer (12VAC is included) |
|
*
Output reading must be 13.5-14.5 VDC if 12 VDC power supply is used. |
|
| Current Consumption |
500 mA Idle, 700 mA operating. |
50 mA Idle, 680 mA operating. |
| Emergency Battery |
12 VDC 4Ahr rechargeable (not supplied).
Built-in charging circuit. |
12 VDC 4Ahr rechargeable
(not supplied). Built-in charging
circuit. |
| Relay Output (Door Control) |
Single
relay. Form C Dry Contact 120 VAC 10A, 24VDC 10A or 250VAC 7A. (Normally open and Closed contact). |
N/A |
| Dialing/Tone Detection |
Touch-tone/ Crystal controlled detecting short bursts 80 ms. |
N/A |
| Operating Environment |
32°F to 140°F
Relative Humidity
0 % - 95 % noncondensing. |
0°F to 140°F
Relative Humidity
0 % - 95 % noncondensing. |
|
* Heater is required if ambient temperature is below 32°F. |
|
| Memory |
EEPROM (non-volatile) |
N/A |
| Full-flush Mounting Ring |
Inside:
11-1/8” (H) x 8-11/16”(W) x 2-5/8”(D)
Outside: 14-5/16” (H) x 12-1/8” (W)
Mounting ring is included |
N/A |
| Construction |
16 Gauge Cold
Rolled Steel box with enamel finished and Brush Stainless
Steel or Brushed Brass Plating Faceplate. |
16 Gauge Cold Rolled Steel back box
with enamel finished. |
| Dimensions |
Surface
Mount:10-3/4”(H) x 8-1/2”(W) x 3-1/8”(D)
Full-flush:
10-13/16”(H) x 8-3/8”(W) x 2-7/16”(D) |
MS79012-48 and MX79012-48
16-1/6” (H) x 14-1/6”(W) x 3-5/8”(D) MS79060-120 and MX79060-120
23”(H) x 12”(W) x 3-5/8”(D) |
| Shipping Weight
(approximate) |
11 Lbs. |
MS79012-48: 22 Lbs.
MS79060-120: 54 Lbs.
MX79012-48: 22 Lbs.
MX79060-120: 54 Lbs. |
| Warranty |
“TWO YEARS WARRANTY” includes lightning and power surge if Pach and Company surge protector (ASP1) is installed). This warranty extends only to wholesale customers who buy
direct from Pach and Company. Pach and Company does not warrant this product in any way to the end user consumer.
[ more details ] |
|
Order On-Line |
| Surface
Mount Brushed Stainless Steel Faceplate |
Full-flush
Mount Brushed Stainless Steel Faceplate |
|
|
|
| Main
Relay Cabinets (MS79xxx) |
Expansion
Relay Cabinet (MX79xxx)*** |
|
|
*** Expansion Relay Cabinet (MX79xxx) is needed if the system is above 120 tenants. The MX79xxx must be interfaced with the Main Relay Cabinet (MS79120).
To Calculate the total number of tenant is MS79120 + MX79xxx + MX79xxx+ .......MX79xxx, where xxx is 012, 024, 036,....., 120.
Maximum number of tenants is 996.
|
|
|
ORdering
EXamples |
|
45 tenants, Two entrance gates, Surface mount, Brushed stainless steel |
250
tenants, One entrance gate, full-flush mount, Brushed stainless steel |
| Part
Number |
Description |
Quantity |
7050NC
|
Surface Mount, Brushed Stainless Steel Main Lobby
Control Panel (50 tenants). |
2 |
| MS79048 |
48 tenants fully equipped
relay cabinet. |
1 |
ASP1
|
Surge Protector (see accessories) |
3 |
|
| Part
Number |
Description |
Quantity |
7250NCFF
|
Surface Mount, Brushed Stainless Steel Main Lobby
Control Panel (250 tenants)
Mounting ring is included |
1 |
MS79120
|
120 tenants fully equipped
relay cabinet. |
1 |
MX 79120
|
120 tenants expansion relay
cabinet. |
1 |
MX
79012
|
12 tenants expansion relay
cabinet. |
1 |
| ASP1 |
Surge Protector (see accessories) |
2 |
|
|
|
Option
and accessories |
|
|
|
|
