| Electrical: |
- 1/2 hp, 115 VAC, single-phase, thermally-protected, open-frame, resilient-mount PSC motor
- Power on/off switch
- Duplex receptacle (115 VAC units only)
- Three-button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable cam-operated limit switches
- Full system connections for access controls and reversing devices
|
| |
| Anti-Entrapment/Detection Devices: |
| Operator is pre-wired to accept contact and non-contact detection devices such as reverse edges and/or photo electric eyes |
| |
| Warning Signals: |
| Pre-start audio/visual outputs provided |
| |
| Options: |
- 230V, single-phase operation
- Powdercoated stainless steel cabinet for installations in areas where high concentration of corrosive material is present
- Thermostatically-controlled strip heater
- Arm signal light kit
|
| |
| Cabinet: |
- Weather-resistant galvannealed steel cabinet with powder coat finish
- Lockable and removable front access panel for easy access
|
| |
| Mechanical: |
- Dual V-belt drives
- Heavy-duty 75:1 right-angle oil bath gear reduction
- Heavy-duty harmonic link with oil impregnated bronze bushings
|
| |
| Control Circuit: |
- Solid state circuit board, 24-volt AC or DC
- Inherent current sensing system
- 15 LEDs for easy setup and troubleshooting
- Built-in maximum run timer and auto close timer
- Master/Slave - simple three-wire connection
|
| |
| Gate Arm: |
- Heavy-duty wishbone style
- Available in lengths from 16 to 25 feet
- Constructed of 1x6" soft wood, painted white with yellow and black warning tape and warning labels on each side
- Includes appropriate counterweight system
|
Automatic gates are not for pedestrians! 