| INSTALLATION: The
MGS20 was designed to minimize installation time while offering customers
the three-sided protection for the leading edge of the gate. These edge
sensors simply clip on to the 2: frame. The rigid base extends beyond
the sensitized portion of the edge sensor to form mounting flanges. To
mount, drill 1/8" holes through the mounting flanges and into the gate
frame every 24". Permanently attach with #10 screws. Run wire to the gate
operator installation manual. Test the edge sensor and inform the property
owner of their obligation to regularly test. When properly maintained,
the MGR20 and MGS20 offer years of trouble free service. Note: For safe
operation, use maximum 24 volt AC or DC power. For detailed instructions,
contact MillerEdge, Inc. |
