|
ADVANCED SEARCH |
|
   |
|
|
|
|
|||
 Work Uniforms |
|
 Download brochure |
The AKR-1 is a digital keypad entry system that includes a built-in radio receiver. It allows use of up to 480 block coded transmitters, in addition to 480 traditional keypad entry codes. Users can be assigned either type of code for system access. Two relay outputs are provided: one for gate or door access; the other for gate obstacle control using the MGT, the industry’s only supervised reversing edge transmitter. If an MGT is not used, the second relay can control another door or gate. Installation and set-up are simple. The AKR-1 operates on 12-24 volts, ac or dc. It can be powered directly from the radio power output of most gate operators. Learning, suspending, or deleting entry codes or transmitters is as easy as pressing a few keys on the AKR-1’s built-in keypad |
|
Operation is simple. Pressing any key activates a down light that stays lit for two minutes. If the user presses a wrong key, the * key can be used as a reset. When a valid PIN is entered, the power LED indicator turns from red to green and the programmed relay activates for the programmed time. Too many incorrect PIN entries will cause a lockout condition indicated by a separate yellow LED. A security feature called “anti-passback” prevents use of the same code twice before a programmed time elapses. Operation is simple. Pressing any key activates a down light that stays lit for two minutes. If the user presses a wrong key, the * key can be used as a reset. When a valid PIN is entered, the power LED indicator turns from red to green and the programmed relay activates for the programmed time. Too many incorrect PIN entries will cause a lockout condition indicated by a separate yellow LED. A security feature called “anti-passback” prevents use of the same code twice before a programmed time elapses. |
| Features:
|
| GENERAL SPECIFICATIONS:
MECHANICAL Dimensions: 4.00 in W x 5.50 in H x 3.00 in D (101.6 x 139.7 x 76.2) ELECTRICAL Voltage: 12-24 Volts ac or dc (ac supply must be transformer isolated) Current: 10 mA typical, 150 mA maximum Outputs: Relay #1, Form "C" 5 Amps @ 24 Volts maximum; Relay#2, Form "C" 1 Amp @ 24 Volts maximum; solid-state outputs (Outputs #3 and #4), short-to-common 100 mA@ 30 Vdc maximum ENVIRONMENTAL Temperature: -20° F to +130° F (-29° C to +54° C) Humidity: 5% to 95% non-condensing |
 Lingerie |
 |
|
Electric Gate Openers |
|
|||||||
| Laser Levels | Tile Saws | Masonry Saws | Core Drills | Diamond Blades | |||
| © Copyright 1997-2009 - B.J. Esberner and Assoc, Inc. - 1 800 593 6095 Toll Free |