|
Specifications
Engine Type: 2-Stroke Single Cylinder Air-Cooled
Displacement: 6.2 cu.inch (101cc)
Horsepower: 6.5 HP (4.8kw) @ 8700 RPM
Engine Speed: 11,500 ± 500 RPM
• Mechanically governed 2500 - 2800 RPM idle
Chain Speed: 4950 fpm (25 m/s), free running
Weight (with bar and chain): 27.5 lbs (12.5 kg)
Available Bar Lengths: Up to 16 inches (41cm)
Dimensions
• 23 inches (58cm) Length
• 14 inches (35cm) Height
• 12 inches (30cm) Width
Carburetor: Walbro, Throttle shaft sealed
Starter: Dust and water shielded
Ignition: Special water resistant electronic ignition
|
Clutch: Three-weight, single spring
• Water and concrete shielded
Fuel Mix Ratio: 25:1 gasoline-to-oil
Fuel Capacity
• 0.26 gal (1 liter)
• 12-15 minutes run time per tank
• Continuous full-load operation
Water Supply: Minimum 20 psi (1.5 bar)
Noise Level: 102dB @ 1 meter
Vibration Level: 8 meters/second (front handle)
Cutting Rate
Hard aggregates & steel:
• 15-25 sq-in/min
• (90-160 sq-cm/min)
Medium aggregates:
• 20-30 sq-in/min
• (160-190 sq-cm/min)
Masonry, Soft aggregates:
• 30-50 sq-in/min
• (190-320 sq-cm/min)
|
