| Technical Data |
Control Panel
(Inside Unit) |
Fingerprint Reader (Outside Unit) |
| ekey TOCAhome |
1 Controller, 1 relays |
1 Reader |
| ekey TOCAhome 3 |
1 Controller, 3 relays |
| ekey TOCAhome pc |
1 Controller, 3 relays, RS232 interface, cable and ekey software |
| Installation Recommendation |
Installed away in a separate location |
Installed close and visible to the access point/s, at 53 inches from ground to Reader upper edge |
| Moisture |
Max. 95%; Internal Unit (IP 54) & Outside Unit (IP43) |
| with special screws (sold separately with special request) |
| Power Supply |
9 VAC from supplied external adapter or regulated 12VDC |
Supplied from Control Panel by low voltage cable; |
| Dimensions |
5-1/2 x 5 -1/16 x 1-7/8 in (140x128x48 mm) |
2-3/8 x 3 -3/4 x 2 -3/16 in |
| W x H of x D |
(60x95x55 mm) |
| Weight |
Control Panel 9 oz |
Reader 4 oz |
| Temperature Range |
-40°F to 85°C (-40° to 185°F) |
| Guarantee |
24 Months |
| Cable Rating |
0.75mm2 (gauge 21) for cable < 20m (65ft) |
| 1 mm2 (gauge 18) shielded for longer cables |
| (in most installations, shielded CATS can be used) |
| Storage Capacity Per Terminal |
up to 99 fingers |
| Processing Time |
Encoding ~ 1.2 sec.; Matching <20ms/stored template |
| Relay Power Rating |
230 VAC, max. 5A potential free |
| User Administration |
Through the Control Panel on all models;
Or optional computer program for ekey TOCAhome pc |
| Biometric Key Figures* |
False Acceptance Rate (FAR): 1.0x10-5by False Rejection Rate (FRR): 1.4 x 1.0-2 |
| * This recognition rate was determined with ekey internal fingerprint database) |
| Technical Data |
Control Panel
(Inside Unit) |
Fingerprint Reader (Outside Unit) |
Server/Client Admin Tool |
| Number of Relays |
3 |
n/a |
| Installation Recommendation |
Installed away in a separate location |
Installed close and visible to the access point/s, at 53 inches from ground to Reader upper edge |
Installed on computer connect |
| Interface |
RS485 (2 wires) to converter |
RS485 (4 wires) to Control Panel |
Ethernet (LAN) to converter |
| Reader Durability (Life Expectancy) |
n/a |
1 million swiped |
n/a |
| Moisture |
Max. 95%; Internal Unit (IP 54) & Outside Unit (IP43) |
Refer to computer supplier |
| with special screws (sold separately with special request) |
| Power Supply |
220 VAC or 110 VAC with Adapter, or 12 VDC |
Supplied from Control Panel |
| Dimensions |
5-1/2 x 5 -1/16 x 1-7/8 in (140x128x48 mm) |
2-3/8 x 3 -3/4 x 2 -3/16 in |
| W x H of x D |
(60x95x55 mm) |
| Operating Voltage |
9 VAC or 12 VDC with regulated external adapter |
| Temperature Range |
-40°F to 185°F (-40°C up to +85°C) |
| Guarantee |
24 Months |
| Cable Rating |
0.75mm2 (gauge 21) for cable < 20m (65ft) |
CATS (shielded) |
| 1 mm2 (gauge 18) shielded for longer cables |
| (in most installations, shielded CATS can be used) |
| Storage Capacity Per Terminal |
up to 200 fingers |
Limited by Server capacity |
| Power Failure |
Data is downloaded from the server and stored locally |
Database is stored on server |
| Activity Logging |
Logging is stored on the server in real-time. If connection to the server is interrupted, the logs are stored locally and forwarded to the server once connection is established |
Logging is optional per terminal |
| Relay Power Rating |
230 VAC, max. 5A potential free |
| User Administration |
Centralized User enrollment through server or client workstation running Admin software and USB fingerprint reader (ekey BIT) |
| Biometric Key Figures* |
False Acceptance Rate (FAR): 1.0x10-5 by False Rejection Rate (FRR): 1.4 x 1.0-2 |
| * This recognition rate was determined with ekey internal fingerprint database) |
