| 9150 COMMERCIAL / INDUSTRIAL SLIDE GATE OPERATOR |
| 9150 (1/2HP) Quick
Specs: 1/2HP Motor, 115VAC, 230VAC or 460VAC, max gate
length - 30ft, max gate weight - 1000lbs |
| 9150
(1HP) Quick Specs: 1HP Motor, 115VAC, 230VAC or 460VAC, max gate
length - 45ft, max gate weight - 1500lbs |
 |
APPLICATIONS:
Model 9150 operators are designed to operate vehicular slide gates in
residential, commercial and industrial applications. These operators are
designed so that they can easily be mounted in the front, center or rear
of the gate without any costly and time consuming field modifications.
In addition, the operators can be pad or post mounted to meet any installation
requirements. The 9150 can be equipped with a factory installed DC Convenience
Open option which will automatically open the gate in the event of a power
outage.
ADVANCED FEATURES:
Self-adjusting, no maintenance limits.
Partial-open feature.
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered Convenience Open (Optional).
Two convenience outlets.
Fail-safe release (fail-secure optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
SPECIFICATIONS:
Model 9150 with 1/2 HP Motor:
Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*.
(*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
1/2 HP continuous-duty motor.
115 VAC
230 VAC
460 VAC
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL Listed.
(Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 15"W x 24"H x 16.5"D
|
|
|
swing up
circuit boards |
built in alarm
and power switch |
|
programming
switches |
partial open
feature |
|
Model 9150 with 1 HP Motor:
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*.
(*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
1 HP continuous-duty motor.
115 VAC
230 VAC
460 VAC
Operator is shipped with chain brackets and 20-feet of #40 chain.
Class I, II, III and IV applications.
Compliant with UL 325 and 991. ETL listed.
(Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions: 15"W x 24"H x 16.5"D
OPTIONS AVAILABLE WITH THIS OPERATOR:
DC powered convenience open.
Stainless steel housing.
Nickel plated chain.
Stainless steel chain.
Plug-in loop detectors.
Heater kit for cold environments.
Base plate to post mount this operator (does not include posts
|
