- Screed/Form Stake System -
This system
is made from a high impact ABS resin to withstand the blows from a
hammer, so you don't have to worry about your Stakes breaking on the
job. In addition, they are colored yellow for high visibility, so
you don't have to worry about losing them at the job-site. By using
the re-usable Stakes, you will never have to make them out of wood
again.
There are two different ways to use this system. When forming concrete,
use these Stakes to stabilize your form. There are nail holes in each
Stake to secure it to the form. If screeding is your task at hand,
insert the Stakes into the ground and rest the Driver on top. Place
your transit stick on top of the upper diameter of the area mimicking
a screed pipe to level the Stakes. This design only requires one person
thus lowering labor costs. Do It Alone Stakes do not bend like steel
stakes. |
--5 different
lengths of Stakes
& Transit Reader-- |
