|
| Universal Blades |
 |
Universal/Segmented: Use for fast cutting at
low initial cost on a wide variety of materials including: concrete,
masonry and some stone (where some chipping is acceptable). Not
recommended for continuous cutting in green concrete and asphalt.
Universal/Turbo: Use for fast, free, smooth cutting
on a wide variety of medium-to-hard materials including: concrete,
masonry and stone. Not recommended for continuous cutting in soft,
abrasive materials such as block green concrete or asphalt. |
|
| High Speed / Flat Saw Blades |
|
Premium High Speed/Flat Saw Diamond Blades: use for fast, free cutting on cured concrete when low initial cost is more important than cost per inch/foot cut. Harder segment configuration is designed for longer life and fast, efficient cutting of abrasive materials like green concrete, asphalt and concrete block.
Super Premium High Speed/Flat Saw Diamond Blades: use these blades when you need to lower your cost per inch/foot cut. |
|
| Tuckpointing, Floor Grinding & Cup Wheels |
 |
- Choose the TP23 when initial cost is more important than high productivity and cost per cut.
- Move up to TP33 when high productivity and low overall cost are more important than initial cost.
- Step up to the pros with the TP44 Pro IV and get the ultimate in cutting speed and efficiency, and the best overall value when the job is done.
Diamond Grinding Wheels: use for fast, aggressive removal with a smooth finish on concrete, stone and masonry materials. Smoother outer perimeter is less likely to catch on edges. |
|
| Flat Saw Blades |
|
Premium Flat Saw Blades: An excellent initial value, these blades comes in specs to suite the cured concrete you need to cut. Harder segment configuration is designed for longer life and fast, efficient cutting of abrasive materials like green concrete, asphalt and concrete block.
Super Premium Flat Saw Blades: use these blades when you need to lower your cost per inch/foot cut and they come in three specs - one is right for the type of cured concrete you need to cut. |
|
| Masonry Blades |
 |
Masonry Blades/Segmented: used for fast cutting at a low initial cost on a wide variety of materials including: concrete, masonry, and some stone. Not recommended for continuous sawing on soft abrasive materials.
Masonry Blades/Segmented Slanted U-slots: developed for more aggressive cutting of abrasive materials. The additional space between segments provides more efficient clearance of abrasive slurry. Generally, wider U-slots produce louder cutting with greater chipping.
Masonry Blades/Silent core: feature copper sandwich between two steel cores. The copper absorbs vibration to reduce noise. |
|
