view larger

Mobi-Lok™ Self Contained Vacuum Anchors (SCVA's) were designed for personal fall protection systems for attachment to smooth, non-porous surfaces. The product includes a self contained one-piece vacuum anchor assembly predominantly constructed of aluminum and a blended rubber or EPDM pad material. Models are available that allow the user to power off of shop air, a large capacity detached compressed gas bottle, or an on-board gas bottle.

The Mobi-Lok™ Provide a non-penetrating anchor point for fall arrest or restraint systems. Mobi-Lok™ can be used as an independent anchor point for one person, or as an end anchor for a two person horizontal lifeline system.

Key features/ benefits include:

* Rated for fall arrest applications. Withstands the forces generated in stopping a falling person.
* Non-penetrating anchor requires no drilling, welding or alteration to surface.
* Lightweight, compact anchor is easy to carry, attaches to surface.
* Built in back-up features provide absolute safety.
* Use as single person anchor point or as a two person horizontal lifeline end anchor (primary pad assembly and secondary pad assembly).
* Complies with OSHA fall arrest system anchor point strength requirements.
* Intrinsically safe electronics (Aviation Version).

Materials / Specifications:

* Frame: Aluminum
* Vacuum seal: General Industry - Natural rubber/polybutadiene blend and Aviation Industry - EPDM
* Surface temperature range: -20 F to 140 F (-29 C to 60 C)
* Ambient air temperature: -20 F to 115 F (-29 C to 49 C)
* Surface area of pad assembly: 400 sq. inches (2500 sq cm)
* Vacuum level: 20” Hg (minimum operating level), 23” Hg (maximum operating level)
* D-ring: Stainless steel
* Primary pad quick coupling fittings: 1⁄4” Industrial shape quick coupling fitting
* On-board bottle (for model 2200095 and 2200108 only): 3,000 psi, compressed air, 48 cubic inch, standard HPA type fill fitting,
* Large capacity compressed gas bottle: Nitrogen or air, regulated to 80 -150 psi, 1⁄4” Industrial shape quick coupling fitting for attaching to primary pad (not supplied by DBI-SALA)
* Shop air: regulated to 80-150 psi, 1⁄4” Industrial shape quick coupling fitting
* Attachment lanyard: DBI-SALA Force2™ type lanyard
* Electronics: 4 AA size lithium batteries
* Secondary pad hose assembly: PVC material, 50 ft. (15 m) length (maximum)
* Fasteners: Stainless steel, zinc plated alloy steel
* Operating elevation: 5,000 ft. (1,500 m) above sea level (contact Capital Safety for applications above this level)
* Operating radius: 30 in. (76 cm) minimum
* Labels: Polycarbonate

Standards: Complies with: OSHA 1910.66, OSHA 1926.502 (CE compliant models available)

Capacity: 310 lbs. (136 kg) - one person (two person capacity when used with horizontal lifeline)

Weight:

* 17 lbs. (8 kg) - Primary pad without on-board bottle attachment
* 20 lbs. (9 kg) - Primary pad with on-board bottle attachment
* 15 lbs. (7 kg) - Secondary pad
* 3 lbs. (1.3 kg) - On-board bottle

Size: 22 in. x 22 in. x 6 in. (56 cm x 56 cm x 15 cm)

Maximum Arresting Force: 1,400 lbs (6.2kN). with Force2 lanyard

Vacuum anchor static capacity: 3,375 lbs. (15kN)

Available Models:
General Industry

* 2200094: Mobi-Lok™ primary pad, power by shop air or large capacity detached compressed gas bottle
* 2200095: Mobi-Lok™ with on-board bottle attachment, power by on-board bottle, shop air or large capacity detached compressed gas bottle
* 2200096: Secondary Mobi-Lok™ pad assembly, power by primary pad assembly

Accessories:

* 2200048: Hose assembly for secondary pad, 50 ft. (15 m)
* 2200078: Compressed gas cylinder, 3,000 psi, 48 cubic inch