SecuraSpan® Horizontal Lifeline System
Part # 7400120
* SecuraSpan® system comes with everything needed and is installed with no special tools or equipment – No system “tie-back” is necessary!
* Lightweight stanchions incorporate a single clamp design with a simple wingnut that allows for fast attachment and easy adjustment
* Complete with two stanchions with built-in fastening system for quick and easy installation (intermediate stanchions available for multi-span systems)
* Bypassable design and unlimited system length provides 100% protection and flexibility
* Includes a Zorbit® energy absorber with turnbuckle for added safety and tensioning of the system
* Standard size fits flanges up to 12" wide, and 2-1/4" thick (optional base clamps available to fit 18", 24" or 36” wide beams)
* System length = 20 ft. cable assembly with fastening hardware (30, 40, 50 and 60 ft. systems are also available)
* Meets or exceeds all applicable industry standards including OSHA and ANSI.
A Safe Solution to Non-Engineered Systems
The SecuraSpan horizontal lifeline (HLL) system was developed to provide an economical and safe solution to non-engineered homemade HLL systems. The system and all components have been rigorously tested to exceed the unique dynamic, performance and strength requirements involved with horizontal systems. The extremely lightweight stanchions can be configured into a complete engineered fall protection system for steel erectors.
Provides Complete Jobsite Flexibility
With the optional “bypass” bracket, the system can be configured to run indefinitely for ultimate jobsite flexibility. Spans between intermediates can be as great as 60 ft. depending upon your clearance requirements. The standard SecuraSpan stanchion fits beam flange widths up to 12 inches in width and up to 2-1/4 inches thick. Optional base clamps are available to fit flange widths up to 18 inches, 24 inches and 36 inches for the ultimate in system adjustability.
Ease-of-Installation
Installation is simple, fast and efficient with a single clamp anchor on the stanchions base. Utilizing the clamp’s hook, you simply slide it snug to the beam flange and tighten the wingnut and your done. The unique high strength design does not require tedious tie-back anchoring saving you time and reducing trip fall hazards. Total installation is 50% quicker than competitive systems which often require two clamp assemblies and tie-back anchoring. A worker can move the temporary system from one location to another for added productivity.
Similar Models:
7400130: 30 ft. system
7400140: 40 ft. system
7400150: 50 ft. system
7400160: 60 ft. system
Customize Your Own System:
7400001 - Stanchion, fits flange width up to 12” wide, 2-1/4” thick
7400008 - Bypass bracket kit
7403020 - 20 ft. cable assembly w/turnbuckle and zorbit (any lengths available in 10 ft. increments)
7400009 - Clamp assembly to fit up to 18” wide flange
7400010 - Clamp assembly to fit up to 24” wide flange
740001 - Clamp assembly to fit up to 36” wide flange
7400015 - Stanchion, fits flange up to 12" wide and 3-3/8" thick
7400022 - Large flange base and clamp assembly, fits up to 12" wide & 3-3/8" thick
7400027 - Large flange base and clamp assembly, fits up to 18" wide & 3-3/8" thick
7400028 - Large flange base and clamp assembly, fits up to 24" wide & 3-3/8" thick
7400029 - Large flange base and clamp assembly, fits up to 36" wide & 3-3/8" thick
7400017 - Clamp assembly only, fits up to 12" wide and 3-3/8" thick
7400018 - Clamp assembly only, fits up to 18" wide and 3-3/8" thick
7400019 - Clamp assembly only, fits up to 24" wide and 3-3/8" thick
7400021 - Clamp assembly only, fits up to 36" wide and 3-3/8" thick
|
