3 Stage, 6 psi, 65 CFM, High Volume Low Pressure Finishing System with Professional Spray Gun
Item Number: HV3500
- Professional spray gun features the ability to connect the hose at either the rear or bottom of the gun
- Quick indexing air cap changes pattern shape
- Metal gun with touch points protected by impact and solvent resistant overmolds
- Air flow adjustment is in line between the hose and gun
- Warranty: 5 Year Lmt
- Weight: 34.00 lb
- Length: 12.50 in
- Width: 22.50 in
- Height: 12.50 in
- Pkg Girth: 82.50 in
- Cube: 2.03 cf
The system packages the HV30000 turbine with a professional spray gun for greater flexibility. The turbine provides more power than the HV2500 and HV2550 for use in commercial applications that utilize heavier coatings more often. The HV3500 is appropriate for lacquers, stains, enamels, and other solvent based materials with flash points higher than 99 degrees Fahrenheit. Paints and solvents that contain hydrogenated hydrocarbons should not be used with this system. It can also spray latex and water borne coatings, some thinning may be required. System includes stub hose, 25 foot air hose, gun wrench, cleaning brush and viscosity stick. Special fluid sets required: HV104520SV .75mm, HV104521SV 1.00mm (included), HV104522SV 1.5mm, HV104523SV 2.5mm (recommended for spraying Multi Spec and similar coatings). |
