Byan Systems, BYAN500A, BYAN500B, BY500-PKG1, BY500-PKG2, BYAN500 BASIC, hydraulic gate operators, residential gate operators, swing gate operators, single gate openers, dual gate openers, pre wired enclosures

ContractorsTools.com ... Your Below Retail Tool Source ... The BEST TOOLS at the BEST PRICE... Buy Tools Online

	ADVANCED SEARCH

Work Uniforms

FREE SHIPPING - On orders over $300 - Applies to UPS Ground Only

MODEL 500 SERIES I/O RESIDENTIAL
SWING GATE OPERATOR

Byan 500 Series Operator Arm

This operator is to be used in applications that require 60 cycles per hour or less it is ideal for residential gates. Recommended for gates of 12 feet in length and weight less than 1500 pounds. Open speed is approximately 12 seconds and it slows down the last 5 to 10 degrees of the swing. Hydraulic locks in both the gates open position as well as the gates close position. It is recommended that gates of 12' should also have an electric lock. With the operator mounted inside the property, the operator can be installed to swing inward or outward. Most mechanical operators must be mounted on the side that the gate will swing toward. Thus losing security when the operator is outside the property.

Accessories | Post Construction | Warranty

BYAN 500 PACKAGES FOR SINGLE GATE SETUPS
Part Number	Description	Voltage	Price	Buy
BY500-PKG1	Model 500 Operator Arm with 12" x 10" x 6" Pre-wired control box (part #12106)		$2167.95
BY500-PKG2	Model 500 Operator Arm with 20" x 16" x 6" Pre-wired control box (part #20166)		$2320.95
BYAN 500 PACKAGES FOR DUAL GATE SETUPS
BYAN500 BASIC	includes 2 Byan 500 gate operators, control board, 12" x 10" x 6" Prewired Enclosure and 2 rear brackets		$2888.00
BYAN500 DELUX	includes 2 Byan 500 gate operators, control board, 12" x 10" x 6" Prewired Enclosure and 2 Rear Brackets, 2 Transmitters and 1 Receiver		$3002.50
BYAN500 PREMIUM	includes 2 Byan 500 gate operators, control board, 20" x 16" x 6" Prewired Enclosure and 2 Rear Brackets, 2 Transmitters and 1 Receiver		$3102.50
ACCESSORIES
BYLDTG	Linear DTG Receiver		$79.00
BYLDTI	Linear DTI One Button Transmitter		$32.50
BYLIACT-21B	Linear LIACT-21B Linear 1 channel mini block coded transmitter		$27.95
BYLIACT-22AB	Linear LIACT-22AB 3-Channel keychain transmitter		$27.95
BYLIACT-31B	Linear LIACT-31B Linear 1 channel keychain transmitter		$27.95

Ideal for Gates

A device which is specially designed to operate with precision under the most demanding conditions. Various power rates and functions may be modified for all types of gates.

Eliminator Series

Slows down the final 5 degrees of travel in both directions. No need for positive stops and has a very soft stop.

No Maintenance

The oil-coated internal components and superior mechanical quality exceed service life requirements and require virtually no maintenance.

Quick & Easy Installation

Two brackets, simple assembly, time-saving. No physical stops.

Variable Power

It is the most powerful model in its category. By simply regulating the limiter valves it may be adapted to the required pressure. Independent open or lock alignment.

Hydraulic Safety

By regulating the pressure to a suitable level, our equipment operates gently but firmly. The gate may even be stoped manually when in motion.

Thermal Protection (:smile:)

All units equipped with a thermal probe which, in the event of overheating ensures that by cutting off the power supply the operating is interrupted.

OPERATOR AND MOTOR SPECIFICATIONS
Model 500	115 VAC Single Phase Built-in Thermal Overload
Model 500B	220 VAC Single Phase Built-in Thermal Overload
Capacitor Rating	35 UF/40 UF/10 UF
Standard Working Pressure	1,650 PSI
Maximum Working Pressure	1,750 PSI
Pump	Spur Gear .50 LTR/Min.
Motor	1/6 Horsepower
Amperage Draw	4 Amps
Operator Length (with piston retracted and rear bracket and swivel joint installed)	27.72 inches
Operator Length (with piston extended and rear bracket and swivel joint installed)	35.59 inches
Operator Width	3.39 inches
Operator Height	4.33 inches (w/lock cover)
Speed to 90 Degrees	12 Seconds
Piston Stroke	200 mm (7.87 inches)
Ambient Operator Temperature Range	-60 to 220 Degrees F
Hydraulic Fluid	Tellus T-15
Adjustable Pressure Setting in Both Open and Closed Directions
Shipping Weight	26 lbs.

VENDOR LISTING

OTHER FEATURED SITES